Repair broken granite

[frediaz]

Can anybody recommend the best product to use to join and disguise the repair on broken granite. The colour is a dark grey, quite speckled, with 3-4 main colours. I can get some of the ground material if it helps. I could put a photo

 

[gcol]

You should be able to join the pieces with this http://www.pureadhesion.co.uk/product/259/jolly-natural-stone-glue-filler-travertine-repair-kit
I've not used it by the way...
I don't know of a product that will allow you to have a polished finish for a filler though.

 

[Jasonb]

Ask your local stone worktop fitter, they use a clear epoxy to join the tops that is tinted to suit nthe stone. and then ground & polished I.ve had a heavily veined marble top done and you would not know (well the client has not seen it )

Jason

 

[gcol]

Nice to see you about Jason.

 

[harmonsmith]

Can anybody recommend the best product to use to join and disguise the repair on broken granite. The colour is a dark grey, quite speckled, with 3-4 main colours. I can get some of the ground material if it helps. I could put a photo

it's my own personal technique than involves a little rotary tool with a special blade to widen the crack with, and then filling it with epoxy glue to match the color. After proper curing (24 hours), you have to sand it flush with the surface of the stone, and use finer grit until you get a finish as close to factory as possible

 

[frediaz]

Thanks for the feed-back