Is it possible to replace faulty fsd on gas oven , failed test.
Repair faulty fsd?
- Thread starter foxhole
- Start date
Sponsored Links
Depends ... make and model? Did the GSR engineer not advise?
It's A Caple CR 9100/1. Could not find spares on their web site.
I'm a little confused, not hard I know, but that model of cooker doesn't seem to have a gas oven, just a gas hob? Is it one of the FSD's on the hob that's not working?
Sponsored Links
Its a gas hob, [electric oven , sorry for confusion.] blowing out a lit burner [any off them] does not turn off the gas supply.
How much time was given for it to shut down?
Thats really not a test.
Allowed 60 secs . Should it be longer?
How old is it? It may not have been fitted with flame supervision devices in the first place. These are only mandatory on hobs fitted in the last 10 years (or so) where fitted to let premises. If it hasn't been newly fitted, and doesn't have them, even in let premises, it is not a failure. The legislation is not retrospective.
How would u test a safety device then ? ( if there is one ) ?
Beginning to think it might not have one , at least 10 years old, wife keeps it in good nick so he may have thought it newer .
The engineer should know if it has a fsd fitted , lift up the burner plate is there another prong other than the sparker ?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
