Hi there, Iv done a lot of plastering and small rendering before but am new to pebble dashing..
My old man has asked me to to a few patch repairs to the pebble dash around his house ( the largest being about 1m2), which looks seems simple enough after reading a few other posts, so thanks to those who replied!
My question is - down one side there is a fine verticle crack (no bigger than 5mm width) in the pebbledash about 2-3metres in length, now iv tapped the render and it dose not sound hollow, it seems fairly sound/solid. Should i still knock away the surrounding areas and repair or can the crack just be filled some way or another..
Cheers for your help.
My old man has asked me to to a few patch repairs to the pebble dash around his house ( the largest being about 1m2), which looks seems simple enough after reading a few other posts, so thanks to those who replied!
My question is - down one side there is a fine verticle crack (no bigger than 5mm width) in the pebbledash about 2-3metres in length, now iv tapped the render and it dose not sound hollow, it seems fairly sound/solid. Should i still knock away the surrounding areas and repair or can the crack just be filled some way or another..
Cheers for your help.
