- Joined
- 25 Aug 2022
- Messages
- 9
- Reaction score
- 1
- Country
Hi
I'm trying to help my son and replace his (defunct) Scottish Power Connect controller with a basic controller (for a combi boiler) and a smart thermostat.
The controller I have in mind is a https://www.draytoncontrols.co.uk/product/lp111 and the smart switch is a AWOW Smart Thermostat (needs 3 wires).
The question I have is:
As the SP Connect used a wireless connected thermostat, which wires do I need to extend to the new smart thermostat?
Does that make sense?
Photos show back plate and unused wires of current setup.
As ever - your expert advice very much appreciated.
I'm trying to help my son and replace his (defunct) Scottish Power Connect controller with a basic controller (for a combi boiler) and a smart thermostat.
The controller I have in mind is a https://www.draytoncontrols.co.uk/product/lp111 and the smart switch is a AWOW Smart Thermostat (needs 3 wires).
The question I have is:
As the SP Connect used a wireless connected thermostat, which wires do I need to extend to the new smart thermostat?
Does that make sense?
Photos show back plate and unused wires of current setup.
As ever - your expert advice very much appreciated.