- Joined
- 7 Apr 2007
- Messages
- 3
- Reaction score
- 0
- Country
New to this forum, but it looks good. Any advice on this:
Am Replacing our ceramic hob. (5.2kw) with a new one at same rating. My confusion is where my old ceramic hob had a connector with standard earth, live, neutral connection, this new hob has a earth, but the live and neutral are split into 2 connections. The manual doesn't help.
How should I make the connection? Connect to one and link the other, or split the 6mm2 cable (3 strands to one 3 to another)?
(Power details:
Connecting to a control unit with 6mm2 cable, which goes to consumer unit with 40amp fuse.)
Am Replacing our ceramic hob. (5.2kw) with a new one at same rating. My confusion is where my old ceramic hob had a connector with standard earth, live, neutral connection, this new hob has a earth, but the live and neutral are split into 2 connections. The manual doesn't help.
How should I make the connection? Connect to one and link the other, or split the 6mm2 cable (3 strands to one 3 to another)?
(Power details:
Connecting to a control unit with 6mm2 cable, which goes to consumer unit with 40amp fuse.)