I want to replace the 2 zone valves in my CH system. (Preventative maintenance; it's summer-time and they're 17 years old.)
The problem is that I've slackened off the compresssion nuts, but there is not enough movement in the pipes to enable me to remove the valves. I've undone all the pipe clips, still not enough room. Any ideas?
ACDC
The problem is that I've slackened off the compresssion nuts, but there is not enough movement in the pipes to enable me to remove the valves. I've undone all the pipe clips, still not enough room. Any ideas?
ACDC