Hi
Have purchased a Drayton Tempus 7 and thought this would be an easy swap (did similar 25 years ago in my first flat) but it turns out not to be! I have the instructions and wiring diagram for the 4033 and obviously for the new Tempus 7.
The problem is that the 4033 is not wired the way any of the diagrams that I can find are and therefore I can not figure which wire goes into which terminal of the Tempus 7.
4033 is wired (this was done by a pro when I had the house rewired a few years back)
1 Thin Light brown wire
2 Thick dark brown wire
3 Empty
4 is joined to six by a piece of thin brown wire
5 Empty
6 Lt brown plus the joining wire to 4
7 Blue wire
Earth - Green and yellow wire
The Tempus has six terminals:
N
L
1 HW Off
2 CH Off
3 HW On
4 CH On
Earth
Can anybody tell me how I should wire the Tempus 7? Do you need any more information about the installation?
Hope you can help as this will save me a few quid!!
Thanks
Have purchased a Drayton Tempus 7 and thought this would be an easy swap (did similar 25 years ago in my first flat) but it turns out not to be! I have the instructions and wiring diagram for the 4033 and obviously for the new Tempus 7.
The problem is that the 4033 is not wired the way any of the diagrams that I can find are and therefore I can not figure which wire goes into which terminal of the Tempus 7.
4033 is wired (this was done by a pro when I had the house rewired a few years back)
1 Thin Light brown wire
2 Thick dark brown wire
3 Empty
4 is joined to six by a piece of thin brown wire
5 Empty
6 Lt brown plus the joining wire to 4
7 Blue wire
Earth - Green and yellow wire
The Tempus has six terminals:
N
L
1 HW Off
2 CH Off
3 HW On
4 CH On
Earth
Can anybody tell me how I should wire the Tempus 7? Do you need any more information about the installation?
Hope you can help as this will save me a few quid!!
Thanks