- Joined
- 11 Sep 2007
- Messages
- 769
- Reaction score
- 31
- Country
Hi Guys,
As in title need to do this as the anes that are in are leaking beyond repair even though they are only a few years old, massive groove out of tap face!
Have got a replacement for this exactly the same, at great expense! Due to the bath being in a really S*** place with the tap end almost impossible to get to, I was thinking that I could leave the uprights from the bath and just undo the actual 'tap' part with the nuts and replace with the new one?
Anyone see a problem with this?
I am assuming that the uprights from the pipe feeds have no purpose apart from letting the water flow, and that the actual tap and mixer are on the bit on the can remove?
Look forward to hearing from you.
Cheers
As in title need to do this as the anes that are in are leaking beyond repair even though they are only a few years old, massive groove out of tap face!
Have got a replacement for this exactly the same, at great expense! Due to the bath being in a really S*** place with the tap end almost impossible to get to, I was thinking that I could leave the uprights from the bath and just undo the actual 'tap' part with the nuts and replace with the new one?
Anyone see a problem with this?
I am assuming that the uprights from the pipe feeds have no purpose apart from letting the water flow, and that the actual tap and mixer are on the bit on the can remove?
Look forward to hearing from you.
Cheers
