I currently have a 'Baxi Bermuda 45/4M' back boiler, which to be fair hasn't given us any problems in 16 years apart from apparently being less efficient than the newer boilers out there.
However, I want to change the the horrible and ugly fire for something a bit more modern looking.
I have just seen the 'Baxi BBU' and I'm thinking this would be a great choice as I can then have a decent looking fire from the Valor range and a nice solid oak fire surround that I have got my eye on.
What I want to know is would this be a straight swap?
My current system consists of:
Not sure whether it classed as gravity fed or what and would appreciate any advice as to what other work may be required to fit this boiler.
Thanks chaps.
However, I want to change the the horrible and ugly fire for something a bit more modern looking.
I have just seen the 'Baxi BBU' and I'm thinking this would be a great choice as I can then have a decent looking fire from the Valor range and a nice solid oak fire surround that I have got my eye on.
What I want to know is would this be a straight swap?
My current system consists of:
Baxi Bermuda 45/4M
Dual Controller (Separate Hot Water & Central Heating Switches)
Thermostat (Hall)
Hot Water Tank + Stat (Airing Cupboard)
Danfoss 3-Port Valve (Airing Cupboard)
Grundfoss Pump (Airing Cupboard)
Emersion Switch (Airing Cupboard)
Central Heating Expansion Tank (Loft)
Cold Water Tank (Loft)
6 x Radiators + TRVs
1 x Towel Radiator + TRV
Not sure whether it classed as gravity fed or what and would appreciate any advice as to what other work may be required to fit this boiler.
Thanks chaps.