Replacing tap valve

[gaz1234]

Hi
I’ve anumber of bristan 1901 taps and some are leaking. I’ve ordered some replacement valves, but someone said I should get them with the silver heads as they come like that and won’t fit. Is that right?
See image

 

[denso13]

If they are the correct size they'll fit.

 

[gaz1234]

Sure. But the tap handle and stalk will fit onto the valve too?

 

[HERTS P&D]

Try it!

Andy

 

[denso13]

Sure. But the tap handle and stalk will fit onto the valve too?

Give it a go.

 

[gaz1234]

Sure. It’s gravity fed. Do I need to turn the cold off and what about the hot?

 

[CountryFan]

I'm inclined to agree you need long spindle/stem insert/cartridges but yours may work but they'll be shorter in length.

As for isolation if the cold is gravity fed then you could go for the gate valve in the loft if fitted or just turn off the main and waste water. As for the hot there should be a gate valve or similar feeding the cylinder from the cold water storage cistern.

 

[gaz1234]

Just found these: https://www.bathroomspareparts.co.uk/bristan-1901-valves-x2-2701225300-30398-p.asp
And cant move the shroud at all, with risk of damaging

 

[CountryFan]

And cant move the shroud at all, with risk of damaging

You could try applying some form of heat or try employing the services of a plumber

 

[gaz1234]

You could try applying some form of heat or try employing the services of a plumber

Who will probably do the same, but yes.

 

[HERTS P&D]

Buy new taps and call a plumber.

Andy