• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

Reversed flow and return pipes on boiler

Joined
18 Dec 2009
Messages
21
Reaction score
0
Location
Devon
Country
United Kingdom
Can anyone tell me what effect reversing the flow and return pipe connections on an open vented system using with a Worcester 15ri condensing boiler would have please ?

Thanks in advance
 
It would notice thatthe sensor temps were wrong, and stop, basically. It might run a little until it gets warm.

If you've done it,
a) NO you can't leave it like that.
b) you ain't the first :lol:
 
It works OK but it sounds a bit like kettling, tinny sort of sound, the manual say quite clearly which is which and to check they are correct before commissioning as though it is important.
 
Thats becuase the temp sensor is on the flow pipe, your friends will in effect be measuring return temp as flow.

I would give advise to swap pipes at boiler asap :idea:
 
Thanks for all your help, the plumber came back today and swapped the pipes around, quite a job.

The boiler sounds a lot more smooth and healthy now.

He showed us the arrows on the boiler adjacent to the pipe fittings ! The arrows show the direction into the boiler so the return pipe is shown as into the boiler not out to the pipe. Just goes to show you should look at the book.
 
The arrows show the direction into the boiler so the return pipe is shown as into the boiler

so all the diagrams, extra stickers on underside of boiler, and full written Manufacturers Instructions and your "plumber" still managed to a rse it up?????

any inhibitor in system?? was it chemically cleaned??? boiler installation notified???

sounds like you had the Clancy Boys doing yer install
 
Seemingly he has a lot of trouble with doors that say enter and exit as well. :?
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top