Friend has just bought a house and the upper and ground floors have a ring main each, but a few upper socket are in the lower ring main.Is this a problem , apart from having to turn off both to be sure they are all off.
Ijohn-I don't know thats why I ask the question.If it's ok then I will leave as is. Will label to show grd and first on both .
He hasn't:You say you have just got the house
Friend has just bought a house ...
... he has a 32 amp feed to cooker socket in kitchen ...
... I will leave as is. Will label to show grd and first on both .
It should be OK to run 4mm² through plaster and/or clipped direct to the surface to create a 32A radial circuit. Just keep at least 2 larger diameters between cables on the surface and one diameter in plaster. The work is notifiable so possibly cheaper to get it done professionally.One more thing guys, he has a 32 amp feed to cooker socket in kitchen, can this be used to supply kitchen sockets when kitchen is refurbed, gas oven/hob will be going in.
Yes, although this would be rather pointless.One more thing guys, he has a 32 amp feed to cooker socket in kitchen, can this be used to supply kitchen sockets when kitchen is refurbed, gas oven/hob will be going in.
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local