Rotated valves on Baxi boiler after E1 error. Now no hot water.

[MissMaple]

Hi there,

So I had an E1 error on my Baxi Duo Tec 28. I tried the to add pressure after it was below 0.5, but couldn't figure out the exact valves I needed to twist to get it to work.

I seem to have fixed the pressure, but now the hot water isn't working. Do you know if I have put these back in the correct position? Also, for future ref which valves are the correct ones for turning? Sorry, my husband used to deal with this.

Thank you

 

[denso13]

The three black ones should be vertical, like the right hand one.

 

[denso13]

To fill, the two blue ones should be vertical, they should both be horizontal in normal use.

 

[MissMaple]

Ah brilliant. Thank you

Should I just make the one on the right horizontal now? Moving the black ones has fixed the hot water issue

 

[denso13]

In normal use, three blacks vertical, two blues horizontal.

 

[MissMaple]

Thank you again

 

[MissMaple]

Sorry. I just tried moving the one on the left to be horizontal...and it made a hissing noise?

 

[denso13]

Just leave it where it is, it isn't critical if nothing is leaking.

 

[MissMaple]

Thanks again