Sabre 25 HE

Joined
8 Oct 2014
Messages
1
Reaction score
0
Location
Glasgow
Country
United Kingdom
I have less than 2 years old Sabre 25HE Install. It made boiling water noise and then 3 lights started flashing Green Amber Red (in that order).

There was no further progress.

I opened the tap water in the bath and switched on the boiler, had heating water temperature to maximum and it did heat up the water slightly.

Switched off and switched on again and Green light was flashing every 6 seconds and then it went to and it remained red.

Tried the same process again twice but no luck three lights keep flashing Green followed by Amber and then red and keeps repeating this circle.

Any help would be appreciated.
 
Sponsored Links
Is the system pressure correct?

If so then there seems to be a boiler fault.

It would normally be covered by the warrantee within two years.

But unless you had it serviced after the first year then the warrantee is invalidated and you will need an engineer.

Tony
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top