Hello , I have searched about and this place with its members seem to have the most knowledge(creep creep). I have hijacked an early post, circa 2005 , and it is almost identical to the problem i have with the exception of the model of programmer which i have altered to suit mine. So here it is........................
I would be very grateful if someone can explain to me (in simple terms) how to connect my new Salus RT300RF wireless room thermostat to my existing Siemens RWB9 Programmer (6 connections -NL1234 with 4 wires from my Baxi going to N&L & 1&4 - plus the earths of course. There are 5 connections on the Salus receiver - SL (off), live in, SL (on) on the top and N & L on the bottom, there is a link from live in to L which has to be removed for volt free operation. I know it may be simple but I have never wired one before.
Thank you in advance for your help.
Michael
I would be very grateful if someone can explain to me (in simple terms) how to connect my new Salus RT300RF wireless room thermostat to my existing Siemens RWB9 Programmer (6 connections -NL1234 with 4 wires from my Baxi going to N&L & 1&4 - plus the earths of course. There are 5 connections on the Salus receiver - SL (off), live in, SL (on) on the top and N & L on the bottom, there is a link from live in to L which has to be removed for volt free operation. I know it may be simple but I have never wired one before.
Thank you in advance for your help.
Michael