SEALING A GAP ?
where the plasterboard meets the aquaboard the tiles havent been cut and placed in that corner yet. I have noticed that there is a small gap of about 2-4mm between the pb and the aquaboard. Before these tiles are put in, should i seal this gap? And if so , how?
Waterproof tape? If tape, do it too it in a L shape, (half of the tape on one wall half on the other) ? would tape stop the tiles sticking properly ?
Or silicon? If so, do it do in the gap or over the gap.
GROUTING
I then understand that once tiles are in we grout the vertical line where the aquaboard and pb meet and then sand down a little and silicon.
Finally, my understanding is you dont grout between the shower tray and tile, only silicon in between with a narrow nozzell and then silicon again on the outside line weith a larger nozzle tube.?
where the plasterboard meets the aquaboard the tiles havent been cut and placed in that corner yet. I have noticed that there is a small gap of about 2-4mm between the pb and the aquaboard. Before these tiles are put in, should i seal this gap? And if so , how?
Waterproof tape? If tape, do it too it in a L shape, (half of the tape on one wall half on the other) ? would tape stop the tiles sticking properly ?
Or silicon? If so, do it do in the gap or over the gap.
GROUTING
I then understand that once tiles are in we grout the vertical line where the aquaboard and pb meet and then sand down a little and silicon.
Finally, my understanding is you dont grout between the shower tray and tile, only silicon in between with a narrow nozzell and then silicon again on the outside line weith a larger nozzle tube.?