Securing gazebo to wall

[daverave7]

I have a basic gazebo on my outdoor patio which has four feet that are screwed into the slabs. It's not very secure (especially in the wind) so I was hoping to attach the two vertical posts nearest to my wall to the wall itself. The posts are metal and hollow and have a square cross section of around 2 inches each side). The distance between the posts and wall is over 30 cm. Any idea how I might go about attaching the posts to the wall, without the need for other than basic DIY? I was hoping there might be an adjustable clamp which screws into the wall that could buy, but can't find anything on the web!

Thanks and stay safe!

 

[foxhole]

Couple of these.
https://www.ebay.co.uk/i/2226150168...UGytzsIBoudCiUSuQX4xuB22_LXpnByRoCLwQQAvD_BwE

Then connect the threaded insert with same size thread bar (available in 1/2 or 1m lengths) fix into wall and drill hole in framing to accept this with nut and washer either side.
Will allow frame to bolt to wall on the thread bar ( cut to length).
Connectors like these

https://www.ebay.co.uk/itm/THREADED...hash=item1a09e06ec5:m:mHQui8_oQXl-ldDB0vCMDKA

 

[daverave7]

Thanks foxhole! I take it that the second link are the nuts I would use to secure the frame? Do you also have a recommendation for the thread bar? or are they all the same thread size?

 

[foxhole]

Thanks foxhole! I take it that the second link are the nuts I would use to secure the frame? Do you also have a recommendation for the thread bar? or are they all the same thread size?

Second link is threaded “joiner” for connecting the bar to bolt, you need to ensure you buy matching size .

 

[daverave7]

Got ya! Cheers!