Setting Accenta Gen4 Mini zones

[Rekusu]

Compliments of the season one and all,

Having just replaced an Accenta Gen4 Mini, I am now trying to set it up within engineer mode. As a non-alarm expert (ie, alarm numpty!), I do find the language in the engineer manual to be confusing, but....

Have everything set, zone names, exit countdown, time, date, walk test, etc and have a 30 second timed entry set, but the alarm activates immediately on entry. Obviously, I need to set the entry door for the timed entry but am lost as to where to find that option.

Really grateful for your advice.

Many thanks

Rex

 

[sparkymarka]

As per manual

 

[Rekusu]

Thanks, I do in fact have the engineer manual; it is just my lack of understanding. I thought I had posted again earlier to say that I have done it but somehow, that post got lost in the internet.

I was setting it fundamentally incorrectly. Following the above instructions with three presses of X, then user reset and check the operation. Seems that what I should have been doing, after pressing X three times, press Set(tick) before user reset. Then my options are saved.

Will be able check when I check / re-set the garage RKP.

As with many things, easy when you know how!!!