Shower cubicle upstand

[str]

Recently had a new shower installed and due to the run of the floor joists and depth for the drain, it had to be raised off the floor on a platform by c. 900mm.

I cannot find any preformed plastic upstands to cover the timber platform as we appear to be higher than the average.

Does anyone have idea on where i can get this or even where I could get one made (around the central belt of Scotland)

thanks

 

[Richard C]

Recently had a new shower installed ------ it had to be raised off the floor on a platform by c. 900mm.

900mm; you sure that’s right You must have very high ceilings, how do you climb into it

 

[str]

did i not mention the ladder

it should have been 90mm but having measured it, its actually 120mm - the highest upstand i have found is 90mm

any ideas?

 

[foxhole]

Have a look at pvc soffit , comes in a variety of sizes and is often cheaper than purpose made upstand.

 

[str]

Yeah, already have some PVC softly, right height but it's a bit too thick and not sure how to get a decent finish on the external corner.