In the bathroom we have an Iflow shower http://www.iflo.co.uk/Products/Products.asp?DisplaySKU=400110&Category=SHOWERS. The problem with it is that the water almost always comes out luke warm despite being hot at the inlet (if i put my hand on the pipe its hot). In our bathroom the hot water pressure is really very low and much lower than the cold. My thinking is that because there is such a difference in pressures and they are both not that great anyway, the shower thermostat can't operate properly. Any ideas coz its doing my head in and has never worked properly!
Shower Problem
- Thread starter Guitarguy
- Start date
stored hot water i presume
could fit a pump
could fit a pump
These bar showers are mostly only suited to high pressure (mains) supplies and will not work properly on unbalanced supplies as you seem to have.
If you still have the manufactures fitting instructions it will tell you what supply pressures / pressure differences it will work under.
If you still have the manufactures fitting instructions it will tell you what supply pressures / pressure differences it will work under.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
