- Joined
- 19 Dec 2017
- Messages
- 4
- Reaction score
- 0
- Country
Hi
Could anybody figure this one out, I have recently moved my bathroom into an adjacent bedroom, all went swimmingly but I am having problems with the shower,
1, CWS tank increased in size and height into the eaves and 350l tank
2, All pipe work done in 22mm
3, Salamander RSP 75 pump feeding
4, 2 victorian style showers on opposite walls in wet room
5, essex flange
6, 200mm+ anti gravity loop.
7, NRV removed after advice from other thread. (although made no difference to flow)
8, Brand new HWC
9, Bottle type air vent on feed (in between cylinder and pump) side of hot water for pump
One of the showers doesn't start the shower pump when turned on, rotate to cold and back and it activates, all the other hot taps are pumped and activate the pump fine.
Doing me box in a bit any ideas please?
Luke
Could anybody figure this one out, I have recently moved my bathroom into an adjacent bedroom, all went swimmingly but I am having problems with the shower,
1, CWS tank increased in size and height into the eaves and 350l tank
2, All pipe work done in 22mm
3, Salamander RSP 75 pump feeding
4, 2 victorian style showers on opposite walls in wet room
5, essex flange
6, 200mm+ anti gravity loop.
7, NRV removed after advice from other thread. (although made no difference to flow)
8, Brand new HWC
9, Bottle type air vent on feed (in between cylinder and pump) side of hot water for pump
One of the showers doesn't start the shower pump when turned on, rotate to cold and back and it activates, all the other hot taps are pumped and activate the pump fine.
Doing me box in a bit any ideas please?
Luke