Hi ,
With some help i've installed a salamander RSP50 , its run fine for a week but this morning its stopped working . it runs for about 30 secs then stops . i took the bleed valve off the top of the cold pipe and nothing came out . after faffing around a bit this seems to have sorted itself and now cold does flow however the pump still cuts out after 30 secs . everytime the pump stops i turn the bleed valve and air escapes then i can run the pump for a further 30 secs . I repeat this over and over i can't understand where its pulling the air in from , any ideas ?
Thanks in advance
Derek[/img]
With some help i've installed a salamander RSP50 , its run fine for a week but this morning its stopped working . it runs for about 30 secs then stops . i took the bleed valve off the top of the cold pipe and nothing came out . after faffing around a bit this seems to have sorted itself and now cold does flow however the pump still cuts out after 30 secs . everytime the pump stops i turn the bleed valve and air escapes then i can run the pump for a further 30 secs . I repeat this over and over i can't understand where its pulling the air in from , any ideas ?
Thanks in advance
Derek[/img]