Shower

Joined
17 Mar 2008
Messages
34
Reaction score
0
Country
United Kingdom
Hello,

I have just purchased a shower tap. The push down button for bath water and pull up button for shower.

"should" all i need to do is turn off the mains cold water and the hot water and let the water drain from the bath taps before getting under the bath to remove the singluar hot/cold taps.

Many Thanks for any advice.
 
Sponsored Links
should be...but open kitchen taps to drain water down.

if its gravity hot it wont work.

if its a combi/unvented it will work great (for a cheap shower solution)
 
Hi,

Im not sure what you mean by Gravity Hot ? or unvented ?

The hot water tap as it is, comes out a quite a bit of pressure.

Our hot water tank is connected to a oil burner for heating the water and CH if that helps.

Regards
.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top