I have a Siemens iQ500. It operates UK, but when I turn the drum by hand the following happens:
Clockwise: Silent, but resistance is felt around twice per revolution.
Anti-clockwise: Spins more smoothly, but has a constant noise.
I have removed the heating element to inspect the inside at the bottom, but there was only a piece of card in there which I removed.
I suspect that there is a wire or something inside, but I cannot get to it.
Any advise would be appreciated.
Clockwise: Silent, but resistance is felt around twice per revolution.
Anti-clockwise: Spins more smoothly, but has a constant noise.
I have removed the heating element to inspect the inside at the bottom, but there was only a piece of card in there which I removed.
I suspect that there is a wire or something inside, but I cannot get to it.
Any advise would be appreciated.
