- Joined
- 25 Nov 2013
- Messages
- 42
- Reaction score
- 0
- Country
Hi Folks,
I have a Danfoss TS715si Timer on the wall.
If I lift the plate back I have
2 Earth / 2 Live / 2 Neutral and (One Cable to Terminal 1 and One Cable to Terminal 4)
I have bought a Danfoss RMT230p which is supposidly very compatable.
Can someone tell me what way I wire the 230p to the existing wall plate. I have read wiring diagrams but I am rather confused.
I have a Basic Heat Only system with no Valves and its Open Vented with one pump.
I have a Danfoss TS715si Timer on the wall.
If I lift the plate back I have
2 Earth / 2 Live / 2 Neutral and (One Cable to Terminal 1 and One Cable to Terminal 4)
I have bought a Danfoss RMT230p which is supposidly very compatable.
Can someone tell me what way I wire the 230p to the existing wall plate. I have read wiring diagrams but I am rather confused.
I have a Basic Heat Only system with no Valves and its Open Vented with one pump.