Hi,
Only the walls are going to be tiled, the floor will be covered with some kind of Vinyl flooring.
Originally I was just going to stick some skirting board on top of the bottom row of tiles when I've completed the tiling. However, having just added new architrave to the bathroom door frame, it's dawned on me that idea will look ridiculous, because the skirting boards would be far too proud of the architrave. Here is a mocked up picture using a piece of old skirting board I had lying around to show what I'm talking about.
Also, if I was to use this type of skirting board (which is the same skirting boards used in the rest of the house) underneath the bottom row of tiles so it's flush with the architrave, the tiles would end up being very proud (something like 6 to 8 mm) because of the a tapered profile on the skirting boards. Here is another mocked up picture to hopefully show what I'm talking about.
I'm tempted not to bother with any skirting boards at all, but surely something will be needed where the Vinyl flooring ends and the wall tiles start ?
What would you guys do ?
Thanks in advance.
Only the walls are going to be tiled, the floor will be covered with some kind of Vinyl flooring.
Originally I was just going to stick some skirting board on top of the bottom row of tiles when I've completed the tiling. However, having just added new architrave to the bathroom door frame, it's dawned on me that idea will look ridiculous, because the skirting boards would be far too proud of the architrave. Here is a mocked up picture using a piece of old skirting board I had lying around to show what I'm talking about.
Also, if I was to use this type of skirting board (which is the same skirting boards used in the rest of the house) underneath the bottom row of tiles so it's flush with the architrave, the tiles would end up being very proud (something like 6 to 8 mm) because of the a tapered profile on the skirting boards. Here is another mocked up picture to hopefully show what I'm talking about.
I'm tempted not to bother with any skirting boards at all, but surely something will be needed where the Vinyl flooring ends and the wall tiles start ?
What would you guys do ?
Thanks in advance.
Last edited: