- Joined
- 30 Sep 2004
- Messages
- 8
- Reaction score
- 0
- Country
ive got a martindale socket tester are they sutible for testing sockets are they everything i need to make sure all ok
how do i do that is that sraight from the cukai said:I have one, and yes I even use it to test all my sockets four times a year, when I test my RCD's too.
Unfortunately it does NOT detect neutral earth reversal, so you still need to do a "ohm meter" test for earth continuity etc.
kai said:Unfortunately it does NOT detect neutral earth reversal, so you still need to do a "ohm meter" test for earth continuity etc.
crystal ball said:Socket testers do not indicate high earth loop impedance, mine showed all ok, when I tested with a loop tester the ELI was 25 ohms. They are ok for l-n polarity and thats about it
E-ZE CHECK XTRA EARTH LOOP IMPEDANCE SOCKET CHECKER EZ150 - £49.80
£8 draper 13A SOCKET TESTER
Three pin socket tester for 13A sockets. Will detect the following electrical faults: no earth, L & N reverse, neutral fault, live & earth reverse and live/fuse fault. Will also test 3, 5, and 13A fuses.
Damocles said:Those enhanced specs for the Martindale would be the ones which say 'currently under construction' then?
Damocles said:Those enhanced specs for the Martindale would be the ones which say 'currently under construction' then?
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local