Somebody well-up on tools

[Dunnomate]

I have to access the ends of 3 self-tappers 1 foot down a 6" internal dia flue pipe, to grind them out.... while balancing like a ballerina on my roof ridge tiles.
I`ve removed clag/tar but my £80 new in 1984 Bosch 4" grinder & the slitting discs I`ve used since I retired the hacksaw, is not a safe bet. Can`t use a drift & hammer either, pot`s too fragile.
I can`t work over the pot. There is so much weight, 20ft of clagged-up pipe, I can`t lift from the top, or jack up from the bottom(I tried), the flexi liner to get the cowling & sleeve above pot lip height to access the screws to undo, so have to grind them out internally to allow the liner to drop down into my room. I could grind the top of the cowl off, but I`d prefer not to. No welding gear anymore.

Can anyone suggest a cheap bit of kit that has one foot reach & grinding capability for confined pipe internal?
Thanks

 

[matlob]

possibly a multi tool with metal blade

 

[Bear2Biker]

I have just today bought one of these from TEMU (local delivery 3 days) for less than £16 but did look at Ebay at £4-6 more. Pipe at 6" diameter you should be able to get your hand down far enough & use a head torch to see?

 

[Dunnomate]

Cheers Bear2Biker! That sounds just what I need, TEMU to the rescue....my neighbour swears by them(while with eBay, I swear at them!).

 

[jj4091]

I don't think safe and cheap will go together for that job. What value do you put on your life. Perhaps at least a cat-ladder, but preferably scaffolding will at least make it a bit better.

 

[stevie888]

I would use a Dremel or similar. Self tappers will be pretty hard steel so I think a multi tool would struggle,

 

[Deluks]

https://www.argos.co.uk/product/7948141?utm_custom6=PLA&deeplink=true&gclsrc=aw.ds&&cmpid=GS001&_$ja=tsid:59157|acid:804-872-0397|cid:20330964438|agid:|tid:|crid:|nw:x|rnd:8209157208500251001|dvc:m|adp:|mt:|loc:1007270&utm_source=Google&utm_medium=cpc&utm_campaign=20330964438&utm_term=7948141&utm_content=shopping&utm_custom1=&utm_custom2=804-872-0397&GPDP=true&gad_source=1&gad_campaignid=19671816703&gbraid=0AAAAAD9II9ndtmpSXuMF-Fmkd8SstQiDo&gclid=CjwKCAjwirLWBhBBEiwAlItbEgnkot0znxgHPVR6IhyxXSGDeM9BuAE7x0RuhLSzQmVhVjK57RkKbRoCrwcQAvD_BwE

Surely a power tool would risk damaging the flue pipe?

 

[mattylad]

The above grinder with the right disc on it should do, I have one (from Lidl) that is similar.
Perhaps gaffa tape it to a length of wood and also have a rope attached to it in case you drop it.