www.wickes.co.uk
www.wickes.co.uk
This is what it looks like.
Will the ply be strong enough to hold a monitor etc.It’s only 1200 x 600 mm, right?
What sort of finish would you like? I made a desk with a bamboo board, finished with hard wax oil, but that wasn’t cheap. You could use plywood, and finish with wax oil, wood stain, varnish or paint. Or you could apply a veneer of some sort.
Non-Structural Hardwood Plywood Sheet - 18 x 606 x 1220mm | Wickes.co.uk
Non-Structural Hardwood Plywood Sheet - 18 x 606 x 1220mm
Or use a “timber board” type product:
(slightly too small, ugh.)General Purpose Pine Timberboard - 18 x 600 x 1150mm | Wickes.co.uk
General Purpose Pine Timberboard - 18 x 600 x 1150mm
Not all the way front to back
iff its 1200x600mm a single 10ft scaffold board will give 1500x 455mm without additional batons
£160 no lacquer ?? for 600x1200mm
www.cutmy.co.uk
Hmm I think the price wasn't updating for me so I thought it was £30 but you're right this is v high.£160 no lacquer ?? for 600x1200mm
19mm Walnut Veneer Birch Plywood
From £2.00 Cut to size Lacquering available Max 2420mm x 1200mmSustainably sourced
All chipboard though which I was trying to avoid but maybe they are good?
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
