'sticky' tap

[driver8uk]

Hi,

I have a kitchen tap with a lever similar to the picture here:

The problem is, when you turn it on, rather than smoothly moving from a trickle to full power, it goes up in jerky movements, so it's easy to soak yourself. Is this likely to be something which can be easily resolved?

Thanks

 

[Softus]

How old is that tap? Was it always like that?

If the tap is faulty then I'd replace or repair it. Otherwise, a compromise would be to install a valve in the supply to the tap (if there isn't already one there), and partially close the valve to reduce the flow. This valve should be a stop cock (screw down type), rather ball-o-fix.

 

[driver8uk]

How old is that tap? Was it always like that?

If the tap is faulty then I'd replace or repair it. Otherwise, a compromise would be to install a valve in the supply to the tap (if there isn't already one there), and partially close the valve to reduce the flow. This valve should be a stop cock (screw down type), rather ball-o-fix.

It's about a year old and has always been like it.

 

[Softus]

That's quite alright. You're welcome.