just removed a small desk which was inset into an alcove,,, it has left a groove (approx 1 inch deep by 1 inch high) around the walls of the alcove...
i want to fill in the groove, but before i dig out the big pot of polyfilla, how do would i best stabilise the crumbly expose plaster... do i use some form of pva sealant to give the filler a stable key?
cheers
i want to fill in the groove, but before i dig out the big pot of polyfilla, how do would i best stabilise the crumbly expose plaster... do i use some form of pva sealant to give the filler a stable key?
cheers