Hi,
I have a stormforce draper air nailer, used a bit 2-3 years ago, then it has been in its box, inside another sealed box in the warm and dry.
Came to use it and it just puffs air, opened it up to see if there was any corrosion, none visible, all clean and still with plenty of its original grease. I oiled it up and tried it again, same problem.
The o-ring for the main cylinder may have swollen? as it takes about 1.5kg or so before it starts moving up or down.
Everything inside is really shiny.
Any ideas what I should try?
I have the Draper "Manual" from online, but it does not provide much help, not even itemising all the parts, just a few obvious ones!
I have a stormforce draper air nailer, used a bit 2-3 years ago, then it has been in its box, inside another sealed box in the warm and dry.
Came to use it and it just puffs air, opened it up to see if there was any corrosion, none visible, all clean and still with plenty of its original grease. I oiled it up and tried it again, same problem.
The o-ring for the main cylinder may have swollen? as it takes about 1.5kg or so before it starts moving up or down.
Everything inside is really shiny.
Any ideas what I should try?
I have the Draper "Manual" from online, but it does not provide much help, not even itemising all the parts, just a few obvious ones!