Struggling to find a gasket seal for upvc rear door UK

Joined
23 May 2025
Messages
5
Reaction score
0
Country
United Kingdom
Hi there guy's.

I have been struggling to find a certain size gasket bubble seal type for our garden door. The seal it self is only placed on the underside of the door as added draught, weather and sound exclusion. The Flat edge is 4mm the bubble itself is 10mm. I will attach some pics in a bit. Any help would be much appreciated.
Best
 
Take a browse thru e-bay sellers as nigh on what is most available is found there. JCP HARDWARE
ncomcinicardohttps://www.ebay.co.uk/itm/403900365540?_skw=uPVC+door+rubber+gasket+seals&itmmeta=01JVY8Y4WXSKBZ8JA3JRBZWA9Q&hash=item5e0a567ae4:g:qREAAeSwh~hn5roD&itmprp=enc%3AAQAKAAAA4FkggFvd1GGDu0w3yXCmi1dMvCDyaqPe1%2B7mkv5FxZS5tJCz%2Fb1ONOdNjPoau9Fixm36kPweoQzYNWaxv0KcgNYRuqkbZhA5QbLFfk38oBXtTV8JAjqNekE4TID5fsAZhytAH%2BXOtXrB%2FnTK0eOBgW%2BlPokygZ%2Fe6OZPj248IX1r9tKoLzGPQckGIob2t8k95Y8%2F1jEbkPIFWd0ui1YZn7WlNA%2FTy%2B9B86kImBWqLNdNa5rFIuf87tZoXbejWOkiMl04gccmDc3zdkG3J0pdNEhrfjjth22CXm2GxEKsoHVQ%7Ctkp%3ABk9SR87O-MjfZQ
 
This is the one...
 

Attachments

  • 174799442158835750671586263763.jpg
    174799442158835750671586263763.jpg
    85.6 KB · Views: 37
I have messaged them. Although I have done a fair bit of trawling of eBay and local uPVC places. Fingers crossed . Thank you
 
Notoriously difficult to find because its manufacturer specific, I'll take a wild guess and say this is a composite door maybe? It'll have an aluminium carrier screwed to the underside that this gasket slides into, usually they rub too much on the threshold and pull out or tear

If I'm right in that its a composite door then its probably a 'Door Stop' door
 
Not composite, I don't think!? Definitely an aluminium rail.
Thanks
 

Attachments

  • 17479968373676428284750759140879.jpg
    17479968373676428284750759140879.jpg
    193.1 KB · Views: 41
  • 17479968705785903187754503315500.jpg
    17479968705785903187754503315500.jpg
    217.7 KB · Views: 30
Ok that's a pvc door and Duraflex profile, Duraflex is no longer in business. If it doesn't need to be a bubble gasket you could try a flipper type gasket from Exitex which you could trim down with scissors if needed, the 4mm flat is the crucial dimension though as anything wider then you'd struggle to slide in
 
Gotcha. Ok. I shall have a look around at this when I next get 5 mins.
Best
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top