And it can't be because you don't have a clue how quote /quote tags work, because when you quoted my post of 16th August 2014 09:07 you would have seem them all laid out in front of you.
You just cannot be rsed to do it properly, can you?
Go away.
Switch or FCU which comes first in a circuit
- Thread starter gardener1214388
- Start date
You just cannot be rsed to do it properly, can you?
Go away.
Thank you Andy...have a nice day
If you insist on making a simple job difficult, then:
Circuit with power -> 3A FCU - > Ceiling switch with neon -> flex connection plate -> towel rail.
Cables in trunking, concealed in the wall, surface clipped, makes no difference.
Could be lighting circuit or socket circuit.
This is a suitable DP ceiling switch: http://www.qvsdirect.com/mk-16a-d-p-1-way-pull-cord-ceiling-switch-without-mount-block
which fixes to a block like this one containing a neon: http://www.qvsdirect.com/mk-mounting-block-with-neon-6-to-16a
The more usual and much easier method is to get one of these:
fitted in the wall next to the towel rail, and connect to a power supply, typically via a nearby socket in the adjacent room.
Thank you Flameport; have a nice day
Good - glad to hear it. b-a-s, for all his knowledge, needs to understand that he's not the final arbiter of who is allowed to post on here.
OK, point taken.
You just cannot be bothered to do it properly, can you?
Please go away.
And it can't be because you don't have a clue how quote /quote tags work, because when you quoted my post of 16th August 2014 09:07 you would have seem them all laid out in front of you.
You just cannot be bothered to do it properly, can you?
Please go away.
=======================
FLAMEPORT answered a simple question with a simple answer(s)
"If you insist on making a simple job difficult, then:
Circuit with power -> 3A FCU - > Ceiling switch with neon -> flex connection plate -> towel rail.
Cables in trunking, concealed in the wall, surface clipped, makes no difference.
Could be lighting circuit or socket circuit.
This is a suitable DP ceiling switch: http://www.qvsdirect.com/mk-16a-d-p-1-way-pull-cord-ceiling-switch-without-mount-block
which fixes to a block like this one containing a neon: http://www.qvsdirect.com/mk-mounting-block-with-neon-6-to-16a
Read more: http://www.diynot.com/diy/threads/s...irst-in-a-circuit.409878/page-4#ixzz3AjPr3ARZ"
What was confusing me was that some people were even discussing the life of a neon, what has that got to do with a simple question of how to fit a simple towel rail. If neon were unreliable; then why would any manufacturer fit them.
Thank you again FLAMEPORT, it's nice to know there are some people left in this world with good old fashioned sense; have a nice day; Over and Out
No other comments to be made by myself on this subject question answered.
So you've read up on supplementary equipotential bonding, and you know whether or not your towel rail needs it to be safe?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
