- Joined
- 17 Dec 2011
- Messages
- 3
- Reaction score
- 0
- Country
I'm trying to get into the guts of my 1/4 turn lever hot kitchen tap. I drained the hot water and got the cap and screw off and took off the lever arm. Then I successfully removed the circlip but the nut holding everything else in just won't budge. I've had a socket on it but no matter how hard I turn it doesn't move.
Am I missing something?
Is it safe to use WD40 or similar on this brass nut and thread, or will that get into my water?
Thanks for any advice!
Am I missing something?
Is it safe to use WD40 or similar on this brass nut and thread, or will that get into my water?
Thanks for any advice!