Hi there.
My elderly mother is considering changing her boiler, only because it is getting a bit old, (it was installed about 25 years ago). It is working ok at the moment. The quotes she has had say that if the (working) pressure at the boiler is not adequate, then new pipework will probably need to be run. Now this will cause a bit of upheaval and she would rather not have the boiler replaced if it means new gas pipework. So, my question is, is there a means for a Gas Safe person to test what the working pressure is without installing a new boiler?
Existing boiler is a Servowarm fed from a short (less than 1 metre) 15mm pipe that joins to a 22mm (or, more likely a 3/4 inch) under the floor above. There is a Gas hob and oven in the kitchen, which is where the boiler is, and there is a gas fire in another room. New boiler would be a Worcester Greenstar 15Ri conventional condensing.
Thanks in advance for your help.
My elderly mother is considering changing her boiler, only because it is getting a bit old, (it was installed about 25 years ago). It is working ok at the moment. The quotes she has had say that if the (working) pressure at the boiler is not adequate, then new pipework will probably need to be run. Now this will cause a bit of upheaval and she would rather not have the boiler replaced if it means new gas pipework. So, my question is, is there a means for a Gas Safe person to test what the working pressure is without installing a new boiler?
Existing boiler is a Servowarm fed from a short (less than 1 metre) 15mm pipe that joins to a 22mm (or, more likely a 3/4 inch) under the floor above. There is a Gas hob and oven in the kitchen, which is where the boiler is, and there is a gas fire in another room. New boiler would be a Worcester Greenstar 15Ri conventional condensing.
Thanks in advance for your help.