Texecom connect app charge/subscription?

Joined
8 Nov 2021
Messages
24
Reaction score
0
Country
United Kingdom
Hi

After installing the smartconnect device to my elite 48w panel ( that was a test of endurance )
I put the panel generated code into the smartconnect app.
I now need to register with an installer i'd from the texecom cloud website. When I go there I can't access my dashboard and it says I need to download the app ? I already have the connect app?

How do I get an installer i'd ? Do I pay for this as the website isn't very clear


Thanks
 
Joined
15 Nov 2012
Messages
411
Reaction score
100
Location
Lincolnshire
Country
United Kingdom
Register as an installer on the Texecom cloud web site. Use a different email address to the one that you used with the app. You will then have an installer account and a separate user account. You will effectively be your own installer.
There is no charge if you just want to use the app. A charge is made if you want to be able to change your panel settings from the cloud rather than using Wintex or the keypad.
Additional charges apply if you are using the 4G version of the SmartCom rather than the ethernet/Wi-Fi version.
Texecom do make it hard to find the details of the charges.
 
Sponsored Links
Joined
8 Nov 2021
Messages
24
Reaction score
0
Country
United Kingdom
I will try this, it's a shame it's so convoluted the process of getting the app up and running

Thanks for your help
 
Joined
20 Jun 2014
Messages
5,771
Reaction score
751
Location
Lancashire
Country
United Kingdom
Feed that back to Texecom as they are the only ones that can change it.

To be fair not sure its that much harder to complete, it was much harder when end users couldn't sign up for an account direct as they then had to find a willing installer to help them out.
 
Sponsored Links
Top