I have a Texecom Elite 64 alarm system. I would like the alarm to sound when the door contact is open but reset as soon as door is closed this would need to be 24 hours. What attributes would I set for this?
It’s for a fire door. So we need to know when it’s opened. And ideally needs to be loud. Is it possible? I have it as pa audible at the moment. But once the door is closed the system has to be reset.
What about a sound bomb wired via a relay to an output set to zone mimic ….it could have a key switch override if required …..we have some systems wired like this
It makes a big difference on how much detail you give to the answer you receive.
sparkymarka probably has the best solution as there is a means of isolating the activation if the door is damaged and it can’t be closed or contact is damaged.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local