- Joined
- 23 Jan 2020
- Messages
- 37
- Reaction score
- 0
- Country
Hi to all on the forum,
I'm here as I do some help please, I have installed a Premier Elite 64 W at my property. The install has gone well so & consists of 2 x hard wired bells (wiring as soon as the cable arrives) 5 pir's & 3 x door contacts.
I have installed Smartcom via ethernet & I have 4 steady Leds the WiFi is flashing &
Software for both is right up to date.
System has no faults.
I have obtained the code for the app on my mobile which works fine.
Problem- I just cannot connect via my laptop to Wintex, I've down loaded it from the Texecom site, and now I'm lost completely.
I dont do computers so I'm really stuck.
Can someone give me an idiots guide to how I start please.
Best to all..
I'm here as I do some help please, I have installed a Premier Elite 64 W at my property. The install has gone well so & consists of 2 x hard wired bells (wiring as soon as the cable arrives) 5 pir's & 3 x door contacts.
I have installed Smartcom via ethernet & I have 4 steady Leds the WiFi is flashing &
Software for both is right up to date.
System has no faults.
I have obtained the code for the app on my mobile which works fine.
Problem- I just cannot connect via my laptop to Wintex, I've down loaded it from the Texecom site, and now I'm lost completely.
I dont do computers so I'm really stuck.
Can someone give me an idiots guide to how I start please.
Best to all..