Texecom Premier Elite PIR

[Craig Bates]

Please could I get some advice on the correct wiring for the Pir in the photograph.
The resistors are placed at 4K7 and 2K2.

Many thanks..

 

[sparkymarka]

 

[Craig Bates]

Brilliant..
Many thanks Mark...

 

[T1GERIII]

The jumpers in the picture aren’t across both pins for resistance…

 

[Craig Bates]

Thanks T1GERIII.

Not spotted that!

Regards, Craig

 

[Craig Bates]

[QUOTE="sparkymarka, post: 5179161, member:
Hi. Do these pre- wires (black/red)stay in pic 2, and then wired as in pic 1..

 

[sparkymarka]

The red and black led backlight wires need to be in the original terminals 12+ ( red ) and 0v ( black )

 

[Craig Bates]

Thanks Mark.
Much appreciated...