Texecom premier part arm problem

Joined
7 Jan 2022
Messages
1
Reaction score
0
Country
United Kingdom
Hi,

I’ve added several pirs to my alarm. They all trigger the alarm when in part arm or full armed mode. however the latest I have added only sets the alarm off when on full arm.
the zones on the keypad for the working and non working pirs are identical.
Could anyone point me where to make the changes to make this go off in all alarm modes please?

Thanks
 
Sponsored Links
Joined
16 Feb 2011
Messages
9,243
Reaction score
1,426
Location
Sheffield
Country
United Kingdom
Zone options part 1, 2, 3 omit ….if any of these are ticked it won’t activate in any of the corresponding part set
 
Joined
20 Jun 2014
Messages
5,775
Reaction score
756
Location
Lancashire
Country
United Kingdom
Programming of the zone will help identify the issue.

Zone type guard access for example will start entry tone if system is part armed but full alarm in full set if activated before the entry is started and then it gets a little more involved with timers expiring.
 
Sponsored Links
Top