Hi, I have an existing Ideal W2000 boiler and a thermal store from Gledhill (Torrent Indirect) going in. Question is, i believe i can have the central heating use the thermal store as a reservoir for heat, so as long as the thermal store is hot then the heating will be immediately hot. There is only one set of connections for the main thermal store. soo.
1. do i connect the rads to the fill and vent connections of the store and allow the DHW pump to circulate through the store thus pumping the store water through the rads and vice versa.
2. With the ideal 2000 which is just a plain boiler, if i fit the thermal store above the boiler, will the boiler circulate the water through the heat exchanger (primary coil) and back to itself without a pump in the primary coil / boiler system.
TIA.
1. do i connect the rads to the fill and vent connections of the store and allow the DHW pump to circulate through the store thus pumping the store water through the rads and vice versa.
2. With the ideal 2000 which is just a plain boiler, if i fit the thermal store above the boiler, will the boiler circulate the water through the heat exchanger (primary coil) and back to itself without a pump in the primary coil / boiler system.
TIA.