thermostat istalation question- Please help

Joined
28 Apr 2007
Messages
1
Reaction score
0
Location
Newcastle upon Tyne
Country
United Kingdom
Hi all
This is my first post so please bare with me. Here is my problem- I would like to know how to wire a thermostat to my Ferroli boiler. When the boiler was installed over ten years ago they did not install a thermostat. Could someone please point me in the right direction, all help would be much appreciated.

Thanks a lot

Peter
 
if you find all the electrical connections there will usually be a connection marked up for either a room stat or external controls with a link wire between the two connections, take the link out and wire your stat to this , you can just use 2 wires to the stat to make it work.
 
How about a wireless r/f stat. Easier to install, all wiring just at boiler end. Wire up as tomy says but you will need L & N to receiver as well.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top