Hello, hope this question is not too dumb, I am going to tile all floors on the ground floor in the same tile. That is hallway, dining room, sitting room and kitchen and would like the lines to flow, is this possible ? And where would I start ? Thanks Steve
Tiling all floors
- Thread starter buslane
- Start date
Sponsored Links
Yes this is certainly possible Steve. However it's going to need careful planning to arrive at a starting point. You'll bascically have to start from the mid point in the whole project and "walk" the tiles, hand over hand until you reach the walls. See what the size the tile will be at the wall and if necessary reposition your start point. You'll probably not end up with an ideal size of tile at every wall in your project but that can't really be helped - you've just got to make the best of it.
There's a little more info on laying out in the sticky post.
There's a little more info on laying out in the sticky post.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
