my toilet has a handle rather then a push button to flush the toilet. It has a lift arm and floating ball system. Recently i'm having to quickly turn the handle twice in order to get the toilet to flush properly. If I turn the handle slowly a little bit of water leaves the tank and the toilet isn't flushed. I've mastered the technique but others are struggling.
I've had a look at the handle to make sure its not loose, it is a tiny bit wobbly. I've also looked at the lift rod and floating ball to see if I can see anything a miss.
Any ideas or advice on what it could be? I was considering converting from handle to push button. But I have a curved stlye toilet so the button wont sit properly.
Thanks in advance.
I've had a look at the handle to make sure its not loose, it is a tiny bit wobbly. I've also looked at the lift rod and floating ball to see if I can see anything a miss.
Any ideas or advice on what it could be? I was considering converting from handle to push button. But I have a curved stlye toilet so the button wont sit properly.
Thanks in advance.