New hand wash, 2nd one as first was swooped with similar problem which is that when switched on ,even on cold setting that water heats up within 30 seconds and after about 45 seconds its too hot (this is on setting number 1)
After speaking to triton the spark says its lack of flow
Looked at it tonight and I get 12-14 lts/ minute.removed all pipe work back to stopcock to check for blockages , none found, filter removed, still overheating
After speaking to triton the spark says its lack of flow
Looked at it tonight and I get 12-14 lts/ minute.removed all pipe work back to stopcock to check for blockages , none found, filter removed, still overheating