I have a Honeywell T6360 thermostat that I suspect is failing and would like to confirm that before I replace it. (Symptom: radiators not turning on).
Looking at the wiring diagram, would I be correct in thinking if I short pins 1 and 3 it would simulate the effect of the temperature being high enough to turn on the heating?
i.e. shorting pins 1 and 3 should make my radiators warm up.
Looking at the wiring diagram, would I be correct in thinking if I short pins 1 and 3 it would simulate the effect of the temperature being high enough to turn on the heating?
i.e. shorting pins 1 and 3 should make my radiators warm up.