good evening all. I hope you all may be able to help me. I wish to install I mirror with demister pad into the bathroom, however the cable coming from the wall for the existing shaver socket is too short. the room has just been decorated so chasing a longer piece of cable through is not going to be possible unfortunately. any advice would be greatly appreciated. would a wago be suitable for the bathroom?
Trying to fit heated mirror in bathroom
- Thread starter pwannell
- Start date
Sponsored Links
A picture would be good....
I had what I think is a similar situation, the mirror was tall enough to cover the shaver light, so I cut a hole in the metal back of the mirror to allign with the cable, fitted a grommit, then crimped extensions to the cables inside the mirror housing, so that they would reach the connector at the bottom
I had what I think is a similar situation, the mirror was tall enough to cover the shaver light, so I cut a hole in the metal back of the mirror to allign with the cable, fitted a grommit, then crimped extensions to the cables inside the mirror housing, so that they would reach the connector at the bottom
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
