I need to repair / replace the boarding on my car trailer. Is it ok to use OSB board or should it be 12mm marine Ply, as it currently is? The former I assume being cheaper.
Type of boarding for trailer?
- Thread starter RrogerD
- Start date
Sponsored Links
buffalo board with anti slip mesh is the proper stuff to use
available in 12 and 18
welbm.co.uk
available in 12 and 18
18mm/12mm Anti-slip Hardwood Plywood 2440x1220mm - WEL BM
Phenolic plywood, also known as mesh ply, hex ply, resin ply and buffalo board (brand name) is a plywood coated in a phenolic resin to make it waterproof.
welbm.co.uk
Ooo, fancy. I wasn't aware of that stuff. Thanksbuffalo board with anti slip mesh is the proper stuff to use
available in 12 and 18
18mm/12mm Anti-slip Hardwood Plywood 2440x1220mm - WEL BM
Phenolic plywood, also known as mesh ply, hex ply, resin ply and buffalo board (brand name) is a plywood coated in a phenolic resin to make it waterproof.
Sponsored Links
Or you could use aluminium if weight is an issue:
Aluminium Floor Plank Deck Trailer Truck Flat Bed Horsebox Planking Board 4.5m | eBay
Aluminium Floor Plank. Suitable for any type of truck or trailer. Profile Wall Thickness- 2.36mm. credit card.
www.ebay.co.uk
Aluminium Plank (Top, Bottom & Middle) - John Adams Supplies
aluminium middle plank
www.johnadamssupplies.co.uk
Aluminium Floor Planking - John Adams Supplies
Aluminium Floor Planking Sizes available - 3000mm 4500mm 6000mm Description Suitable for any type of truck or trailer. Our aluminium floor planking clips together to give a particularly attractive finish, whilst offering a considerable weight saving over a timber or mesh floor which maximises...
www.johnadamssupplies.co.uk
Links in this post may contain affiliate links for which DIYnot may be compensated.
