un-vented S-plan position of composite valves

Joined
9 Aug 2009
Messages
329
Reaction score
2
Location
Blackpool
Country
United Kingdom
When installing composite valves i.e a combined expansion vessel, filling loop, pressure relief valve and pressure gauge, on an unvented S-plan. I wonderd were is the best place to put this. I no the expansion vessel and filling loop are best on the return. However the pressure relief valve is suppose to be on the flow close to the boiler. Anyone got any knoweledge on were to place these composite valves. Thanks for any help.
 
Sponsored Links
Sponsored Links
Steve thinks you mean an un-vented cylinder :LOL:

It should be in the return as close to the boiler as practical.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top